ACM panel pricing software that quotes every panel sign from sheet to install
ACM panel pricing software prices an aluminum composite sign from what it really uses: sheets with waste, printed cast vinyl, laminate, ink, print and router time, layout, mounting, hardware, install crew, lift and travel. SignEstimator does it from your own rates and shows cost and margin before the quote goes out. In our worked example an 8 by 4 ft panel installed at 10 ft costs $1,008.66 with overhead and sells for $1,685 at a 40 percent margin.
The trouble with ACM signs is that the panel is the cheap part. On that 8 by 4 job the sheet is $106.40. The lift, the crew and the drive are $519.50. A rate per square foot built on the panel alone cannot see that.
Estimate this job
- Materials
- Machine time
- Install
- Pricing
Why ACM panel pricing per square foot breaks on small jobs
Most shops quote printed ACM from a number per square foot, often split into a supply price and an installed price. The supply price works. The installed price is where margin leaks, because installation does not grow with the panel.
- A 4 by 2 ft panel on a wall still needs two people, a ladder, a hardware kit and a round trip.
- Above about 6 ft the template moves from a ladder to a scissor lift, and the lift costs the same for one panel as for three.
- A set of twelve small parking or suite panels takes a full crew for two days, because every panel is drilled, leveled and fastened on its own.
- Hardware is per panel. Twelve panels means twelve stud and anchor kits, not one.
- Sheet nesting decides the material cost. Two 2 by 3 panels and a 4 by 8 panel both buy whole sheets.
The same blind spot shows up in how to quote sign installation, which walks through crew hours, lift classes and travel on wall signs. On panels it is simply bigger, because the sign itself is so cheap.
Four ACM jobs priced from parts against a flat $45 per square foot installed
These are example figures from the SignEstimator starter library, run through the ACM panel template: 3 mm ACM at $95 a 4 by 8 sheet with 12 percent waste, printable cast vinyl $1.85 and cast laminate $0.95 per square foot with 20 percent waste, a $35 stud and anchor kit per panel, install crew at $32 per person hour, a 26 ft scissor lift at $185 a half day plus $125 delivery, travel at $3.25 a mile, 18 percent overhead and a 40 percent target margin.
| Job | Sq ft | Cost with overhead | Price at 40 percent margin | Price per sq ft | Flat $45 price | Result at $45 |
|---|---|---|---|---|---|---|
| One 4 x 2 ft panel at 6 ft, 15 miles | 8 | $562.62 | $940 | $117.50 | $360 | Loss of $202.62 |
| One 8 x 4 ft panel at 10 ft, 15 miles | 32 | $1,008.66 | $1,685 | $52.66 | $1,440 | 30.0 percent margin |
| One 14 x 3 ft fascia panel at 16 ft, 20 miles | 42 | $1,225.67 | $2,045 | $48.69 | $1,890 | 35.1 percent margin |
| Twelve 2 x 1.5 ft panels at 6 ft, 15 miles | 36 | $2,195.04 | $3,660 | $101.67 | $1,620 | Loss of $575.04 |
The 14 by 3 fascia panel is close to where a $45 rate comes from, and even there it gives up five points of margin. The 8 by 4 panel gives up ten. The small single panel and the twelve panel set are sold below cost, and both look like easy jobs on the order sheet.
What the 8 by 4 ft panel is made of
| Line | Quantity | Cost |
|---|---|---|
| ACM 3 mm, 4 x 8 sheet, 12 percent waste | 1 sheet | $106.40 |
| Printable cast vinyl, 20 percent waste | 32 sq ft | $71.04 |
| Cast overlaminate, 20 percent waste | 32 sq ft | $36.48 |
| Ink | 32 sq ft | $5.76 |
| Stud and anchor kit | 1 | $35.00 |
| Wide format print and laminate | 0.94 hr | $18.80 |
| CNC router, cut to size | 0.25 hr | $5.50 |
| Layout and proof | 1 hr | $30.00 |
| Mounting graphics to panel | 0.94 hr | $26.32 |
| Install crew, 2 people | 3.5 person hours | $112.00 |
| 26 ft scissor lift, half day plus delivery | 1 | $310.00 |
| Travel, 15 miles each way | 30 miles | $97.50 |
| Direct cost | $854.80 | |
| Overhead at 18 percent | $153.86 | |
| Cost with overhead | $1,008.66 | |
| Price at 40 percent margin | $1,685.00 |
Materials are $254.68, under 30 percent of direct cost. Crew, lift and travel are $519.50, almost 61 percent. If your installed rate was built by marking up the panel, it was built on the smaller half of the job. A Signs101 thread on installed ACM price checks shows the same argument among shop owners: the sale looks fine until overhead and the install day are counted.
Margin on this page means profit divided by price. A 40 percent markup on cost is only a 28.6 percent margin, and markup vs margin for sign shops shows the math on other jobs.
From width, height and quantity to a branded quote
- 1 Pick the ACM panel template and enter width, height, quantity and install height.
- 2 The template counts 4 by 8 sheets from the total area, adds vinyl, laminate and ink, and applies your waste percentages.
- 3 Print, laminate, routing, layout and mounting hours come from your own machine and labor rates.
- 4 Install height picks a ladder, a scissor lift or a boom, and sign installation estimating adds crew hours, the rental and the mileage.
- 5 You see cost, price and real margin, change anything in the quote editor, and send a branded quote the customer accepts online.
Supply only orders, where the customer picks up the panels, drop the install lines in the quote editor. That leaves the material and shop price, which is where a square foot rate actually works.
Lines in the ACM panel template
| Part | How it is priced |
|---|---|
| Panel | 3 mm or 4 mm ACM by the sheet, 4 x 8, 4 x 10 or 5 x 10, with your waste percent |
| Graphics | Printable cast vinyl and overlaminate by area, ink per square foot printed |
| Machine time | Wide format print and laminate by area, CNC router per panel |
| Shop labor | Layout and proof, mounting the print to the panel |
| Hardware | Stud and anchor kit per panel, standoffs or post brackets as extra lines |
| Install | Crew size and hours per panel, ladder or lift by height, half or full day |
| Travel | Mileage both ways, extra trips when the install runs past one day |
| Permit | Fee and drawing hours where the city asks for one |
Your sheet price changes often, and the 4 by 8 ACM price is the line shops look up most. Change it once in the material library and every open template uses the new price. The sign estimating software pricing page lists what each plan includes.
Shops that sell panels every week
Panel signs are the bread and butter of a general sign shop: suite and door signs, parking and property signs, construction site signs, real estate panels and fascia signs for small retail. They come in sets, they come with short deadlines and they rarely get a site visit. That is exactly when a rough rate goes out unchecked.
SignEstimator fits the shop that quotes panels between bigger jobs. The estimator types the sizes and quantity, checks install height, and sends the quote in a few minutes. When the customer asks for a lit sign instead, the same quote can switch to a cabinet, and our lightbox sign estimating software page shows why small lit cabinets need the same parts based approach. For printed jobs without a panel, such as banners and decals, the vinyl sign pricing calculator uses the same rates.
Which plan fits a shop that sells ACM signs
Every plan has a flat price with seats included and no per user fee. Yearly billing takes 50 percent off.
| Plan | Billed yearly | Billed monthly | Fits |
|---|---|---|---|
| Solo | $24 per month | $49 per month | One estimator quoting panels, banners and letters |
| Shop | $74 per month | $149 per month | Up to 5 seats, CRM and QuickBooks Online or Xero export |
| Team | $199 per month | $399 per month | Work orders and job costing against actual install hours |
| Multi-location | $449 per month | $899 per month | Unlimited seats across locations |
There is no free plan. Run one panel through the demo on this page without an account first. If you want to see where a building sign lands across four sign types, the building sign cost comparison prices one storefront as letters, a cabinet, dimensional letters and an ACM panel.
Frequently asked questions
[email protected]In our worked example an 8 by 4 ft printed and laminated ACM panel installed at 10 ft, 15 miles from the shop, costs $1,008.66 with overhead and sells for $1,685 at a 40 percent margin. Supply only, without crew, lift and travel, the same panel is a few hundred dollars.
Price the panel by the sheet with waste, add vinyl, laminate and ink by area, add print, router, layout and mounting time, then add hardware per panel and install as separate lines. Apply overhead and your target margin last. A single rate per square foot works for supply only, not for installed jobs.
The SignEstimator starter library uses $95 for a 3 mm white 4 by 8 sheet, and supplier list prices vary with thickness, color and quantity. Put your own supplier price into the material library once and every ACM quote uses it, with your waste percentage added on top.
Because install costs stay fixed. A 4 by 2 panel still needs two people, a hardware kit and a round trip. In the example above the small panel prices at $117.50 per square foot while a 14 by 3 panel prices at $48.69, using the same rates and the same margin.
Yes. Enter the panel size and quantity, and the template counts sheets for the whole set, hardware per panel and crew hours per panel. In the example twelve 2 by 1.5 ft panels take two install days and two trips, which is why the set prices at $3,660 rather than $1,620.
Quote your next ACM panel with the install priced in
Enter the size, quantity and height, and see the real margin before the customer does.