Lightbox sign estimating software that prices every cabinet from its parts
Lightbox sign estimating software prices a cabinet sign from its parts: faces, translucent vinyl, extrusion, back, LED modules, power supplies, the disconnect, shop hours, install crew, lift and travel. SignEstimator does this from your own rates and shows the margin before the quote goes out. The point is simple. A flat price per square foot overcharges big cabinets a little and loses money on small ones.
Most shops quote lightboxes from a number they trust, often somewhere around $100 a face square foot. It works on the cabinets the number was built on. It fails on the 4 by 2 blade sign, the double faced cabinet on a tall wall and the job 40 miles away, because those costs do not grow with the face.
Estimate this job
- Materials
- Machine time
- Install
- Pricing
Why light box sign cost does not scale with square feet
Part of every cabinet sign cost is fixed. The disconnect and photocell, the shop drawing, a minimum install crew, the lift delivery and the drive cost the same on a 16 square foot sign as on a 60 square foot one. On a small cabinet those fixed lines are most of the job.
- LED count follows face area and the number of faces, so a double faced cabinet needs twice the modules and more power supplies.
- Polycarbonate faces are bought by the sheet, so a 4 by 2 face still uses a full 4 by 8 sheet.
- Extrusion follows the perimeter, which shrinks slower than the area.
- Install height decides the equipment, from a ladder to a scissor lift or a bucket truck.
- Travel is the same for a small cabinet as for a big one.
SignEstimator's cabinet template carries each of these as its own line, so the price moves for the right reason. The same approach drives our channel letter estimating software, where letter count and returns do the same damage.
Three cabinets priced from parts against a flat $110 per square foot
These are example figures using the starter library cost rates (polycarbonate $260 a sheet, LED modules $3.10, 100 W power supplies $55, fabrication $28 an hour, install crew $32 per person hour), waste included, a 26 ft scissor lift at $310 delivered for half a day and 60 miles of round trip travel at $3.25.
| Cabinet | Face sq ft | Total cost | Price at 40 percent margin | Price per face sq ft | Flat $110 price | Margin at $110 |
|---|---|---|---|---|---|---|
| 4 x 2 ft, double faced | 16 | $2,033.97 | $3,389.96 | $211.87 | $1,760.00 | Loss of $273.97 |
| 10 x 3 ft, double faced | 60 | $3,819.65 | $6,366.08 | $106.10 | $6,600.00 | 42.1 percent |
| 16 x 4 ft, single faced | 64 | $4,535.34 | $7,558.89 | $118.11 | $7,040.00 | 35.6 percent |
The 10 by 3 cabinet is where the flat rate came from, and it looks fine. The 16 by 4 single face loses about 4 points of margin. The small double faced blade sign is quoted below cost. Nobody sees it on the job, only at the end of the month.
What the 10 by 3 double faced cabinet is made of
| Line | Cost |
|---|---|
| Faces, vinyl, extrusion, back, 192 LED modules, 5 power supplies, disconnect kit | $2,460.05 |
| Shop labor (print, drawing, fabrication and paint, LED layout and UL test) | $509.00 |
| Install crew, 2 people for 5.4 hours | $345.60 |
| 26 ft scissor lift, half day plus delivery | $310.00 |
| Travel, 60 miles round trip | $195.00 |
| Total cost | $3,819.65 |
| Price at 40 percent margin | $6,366.08 |
Margin here means profit divided by price, not markup. A 40 percent markup is only a 28.6 percent margin, and markup vs margin for sign shops shows the math.
From size and faces to a branded quote
- 1 Pick the cabinet template and enter width, height, one or two faces and install height.
- 2 The template counts sheets, vinyl, extrusion, LED modules and power supplies from your material prices.
- 3 Shop hours come from your rates for printing, fabrication and electrical.
- 4 Install height picks the equipment and sign installation estimating adds crew, lift and travel.
- 5 You see cost, price and margin, adjust if you want, and send the customer a branded quote to accept online.
Face changes and retrofits use the same template, then you remove the cabinet lines in the quote editor, so a new face in an old cabinet is priced as the job it really is.
Cabinet and lightbox lines in the template
| Part | How it is priced |
|---|---|
| Faces | Polycarbonate or flex, by the sheet with waste, one or two faces |
| Graphics | Translucent vinyl by face area |
| Cabinet | Extrusion with retainers by perimeter, aluminum back by the sheet |
| Lighting | LED modules by area and faces, power supplies by total wattage |
| Electrical | Disconnect, photocell and UL label kit, LED layout and test hours |
| Shop | Drawing, print and plot, fabrication and paint hours |
| Install | Crew size and hours, lift or bucket truck by height, travel by mileage |
| Permit | Fee and permit hours where your city requires one |
Illuminated cabinets in the US are generally built and labeled to UL 48 and installed under Article 600 of the National Electrical Code. The NFPA 70 code page is the official source, and your local inspector decides what applies. The estimate keeps the UL kit and electrical hours visible so they are never left out.
Which plan fits a shop that sells cabinets
Every plan has a flat price with seats included and no per-user fee. Yearly billing takes 50 percent off.
| Plan | Billed yearly | Billed monthly | Fits |
|---|---|---|---|
| Solo | $24 per month | $49 per month | One estimator pricing cabinets and channel letters |
| Shop | $74 per month | $149 per month | Up to 5 seats, CRM and QuickBooks Online or Xero export |
| Team | $199 per month | $399 per month | Work orders and job costing against actual hours |
| Multi-location | $449 per month | $899 per month | Unlimited seats across locations |
There is no free plan. Run one cabinet through the demo on this page without an account, and see the full lists on the sign estimating software pricing page. If you are leaving a shop system that charges per user, the shopVOX alternative comparison shows the yearly totals.
When the cabinet goes on a pole or a base
A cabinet on a pole or a monument base is a different bid. The pier, the engineering stamp, the crane and the permit can cost as much as the cabinet. The pylon sign cost breakdown prices a 25 ft pylon line by line, and the monument sign estimate page does the same for ground signs.
Frequently asked questions
[email protected]In the worked example on this page, a 10 by 3 ft double faced LED cabinet costs a shop about $3,820 to build and install and sells for about $6,370 at a 40 percent margin. Small cabinets cost more per square foot, because the disconnect, drawing, install crew, lift and travel are fixed costs.
Many shops use a price per face square foot. It is fast but it ignores fixed costs, so small cabinets and double faced signs are underpriced. A parts based estimate counts faces, extrusion, LEDs, power supplies, shop hours, install, lift and travel, then applies the margin you set.
The starter template uses about 3.2 high output modules per square foot of face, per face, so a 10 by 3 ft double faced cabinet takes 192 modules and five 100 W power supplies. Spacing depends on cabinet depth and the module, so set your own density once in the template.
Yes. Start from the cabinet template, remove the extrusion and back lines in the quote editor, and keep faces, vinyl, LEDs if you retrofit them, install and lift. The quote then shows only the work you actually do on the existing cabinet.
Yes. Set faces to two and the template doubles faces, vinyl and LED modules, recounts power supplies and adds extrusion for the second retainer. In the example above that is why a small double faced sign costs over $200 per face square foot.
Quote your next lightbox from its parts
Enter the size and faces, and see the real margin before the customer does.