Dimensional letter sign estimating software that prices every letter, lift and drive
Dimensional letter sign estimating software prices a set of cut letters from what the job really uses: sheet material with waste, paint by face area, router time, sanding and studding, a mounting pattern, the install crew, the lift and the drive. SignEstimator does it from your own rates and shows cost and margin before the quote goes out. In our worked example ten 24 inch letters at 16 ft cost $1,237.01 with overhead and sell for $2,065 at a 40 percent margin.
The letters are the cheap part of the job. On that set the sheet, paint and studs come to $209.31. The crew, the lift and the drive come to $664. A price built per letter or per inch of height cannot see that, and it is wrong in both directions.
Estimate this job
- Materials
- Machine time
- Install
- Pricing
Why pricing dimensional letters per inch of height breaks
Many shops quote cut letters from a number per inch of letter height, per letter. It is quick, it is easy to say on the phone, and it only works for the middle of the range.
- A set of six 12 inch letters still needs a two person crew, a lift and a round trip. Install does not shrink with the letters.
- Letter height drives material and router time quickly. A 36 inch letter has nine times the face area of a 12 inch letter, and that is where sheets and paint add up.
- Studs and the mounting pattern are per fastening group, not per inch.
- A set that crosses from a half day to a full day on the lift jumps by $80 in one step, so a set with five more letters can cost more than the letter count suggests.
- Painted faces and edges take the same booth setup whether the set is small or large.
The same blind spot shows up in how to quote sign installation, and in the building sign cost comparison, where install was 63 percent of the direct cost of a ten letter set.
Four letter jobs priced from parts against a flat $8 per inch of height per letter
These are example figures from the SignEstimator starter library, run through the dimensional letters template: 1/2 in PVC at $95 a 4 by 8 sheet with 12 percent waste, paint by face area, a stud and pattern kit per five letters, CNC router, sanding and studding time at $28 an hour, install crew at $32 per person hour, scissor lift at $185 a half day or $265 a day plus $125 delivery, a shop owned bucket truck for taller walls, travel at $3.25 a mile, 18 percent overhead and a 40 percent target margin.
| Job | Cost with overhead | Price at 40 percent margin | Price per letter | Flat $8 per inch price | Result at the flat rate |
|---|---|---|---|---|---|
| 6 letters 12 in at 10 ft, 10 miles | $1,001.68 | $1,670 | $278 | $576 | Loss of $425.68 |
| 10 letters 24 in at 16 ft, 20 miles | $1,237.01 | $2,065 | $207 | $1,920 | 35.6 percent margin |
| 18 letters 18 in at 12 ft, 15 miles | $1,602.96 | $2,675 | $149 | $2,592 | 38.2 percent margin |
| 24 letters 36 in at 20 ft, 25 miles | $2,688.87 | $4,485 | $187 | $6,912 | 61.1 percent margin, bid likely lost |
The flat rate fails twice. The small set is sold at a loss of $425.68 and looks like an easy job. The large set carries so much margin that a competitor with a real estimate wins it at $4,485. Both errors come from the same rate.
What the ten letter set is made of
| Line | Quantity | Cost |
|---|---|---|
| PVC board 1/2 in, 4 x 8 sheet with waste | 1 sheet | $106.40 |
| Paint | 35.2 sq ft | $32.91 |
| Studs, pattern and anchors | 2 kits | $70.00 |
| CNC router | 1.5 hr | $33.00 |
| Design and mounting pattern | 1 hr | $30.00 |
| Sanding, paint and studding | 4 hr | $112.00 |
| Install crew, 2 people | 7 person hours | $224.00 |
| 26 ft scissor lift, half day, plus delivery | 1 | $310.00 |
| Travel, 20 miles each way | 40 miles | $130.00 |
| Direct cost | $1,048.31 | |
| Overhead at 18 percent | $188.70 | |
| Cost with overhead | $1,237.01 | |
| Price at 40 percent margin | $2,065.00 |
Crew, lift and travel are $664, or 63 percent of direct cost. On the 6 letter set they are 66 percent. On the 24 letter set of 36 inch letters, where the sheets alone are $532, they fall to 42 percent. Margin on this page means profit divided by price, and markup vs margin for sign shops shows why a 40 percent markup is a different number.
From letter count and height to a branded quote
- 1 Pick the dimensional letters template and enter the number of letters, the letter height and the install height.
- 2 The template turns count and height into face area, counts 4 by 8 sheets with your waste percent and adds paint by area.
- 3 Router, layout, sanding and studding hours come from your own machine and labor rates.
- 4 Install height picks the equipment, and sign installation estimating adds crew hours, the rental, delivery and mileage.
- 5 You see cost, price and real margin, edit any line in the quote editor and send a branded quote the customer accepts online.
Letters in aluminum or acrylic instead of PVC change one line: put your own sheet or metal price into the material library and every open quote follows. If the tenant is still deciding between letters and a cheaper sign, the same quote can add an ACM panel option, which our ACM panel pricing software page prices from sheet to install.
Lines in the dimensional letters template
| Part | How it is priced |
|---|---|
| Face material | PVC board by the 4 x 8 sheet from total face area, with your waste percent |
| Paint | Per square foot of face, with a coverage allowance for edges |
| Machine time | CNC router hours from face area |
| Shop labor | Mounting pattern layout, sanding, paint and studding per letter |
| Hardware | Stud, pattern and anchor kit per group of five letters |
| Install | Two person crew, hours by letter count, equipment by install height |
| Lift | Scissor lift by half day or day, or a shop owned bucket truck, plus delivery |
| Travel | Mileage both ways with a minimum charge on short drives |
Your sheet price changes often. Change it once in the library and every open template uses it. The sign estimating software pricing page lists what each plan includes.
Shops that sell letters between bigger jobs
Cut letters are the standard answer for a tenant who wants a clean look without lighting: office suites, medical practices, schools, banks, lobby walls and storefronts with a landlord who bans cabinets. They come with a short deadline and often without a site visit, which is exactly when a quick rate goes out unchecked.
SignEstimator fits the estimator who quotes letters between channel letter jobs. Type the count and height, check the install height and send the quote in a few minutes. When the customer asks for a lit sign, the channel letter estimating software page shows the same approach for faces, returns and LEDs. For tips from shop owners who price these jobs in the open, the Signs101 forum is still the biggest public record of what shops charge.
Which plan fits a shop that sells dimensional letters
Every plan has a flat price with seats included and no per user fee. Yearly billing takes 50 percent off.
| Plan | Billed yearly | Billed monthly | Fits |
|---|---|---|---|
| Solo | $24 per month | $49 per month | One estimator quoting letters, panels and banners |
| Shop | $74 per month | $149 per month | Up to 5 seats, CRM and QuickBooks Online or Xero export |
| Team | $199 per month | $399 per month | Work orders and job costing against actual install hours |
| Multi-location | $449 per month | $899 per month | Unlimited seats across locations |
There is no free plan. Run one set of letters through the demo on this page without an account first. For a customer price check on a whole storefront, storefront sign cost by install height and letter count shows how the same ten letters move from $1,895 to $2,675 with the wall.
Frequently asked questions
[email protected]In our worked example ten 24 inch PVC letters, painted, stud mounted at 16 ft and 20 miles from the shop, cost $1,237.01 with overhead and sell for $2,065 at a 40 percent margin. That is $207 a letter. Six 12 inch letters on a similar job sell for $1,670, or $278 a letter.
Price the sheet by area with waste, add paint, router time, sanding and studding, a mounting pattern and hardware per group of letters, then price install as separate lines for crew, lift and travel. Apply overhead and your target margin last. A single rate per inch of height misprices small and large sets.
In the ten letter example install is $664 before overhead: seven person hours at $32 for the crew, $310 for a scissor lift with delivery and $130 of travel. Higher walls, longer drives and brick or block mounting push that up, and a second trip adds another travel line.
Flat cut letters are a single thickness, cut and painted. Dimensional letters are thicker or built up, and in the SignEstimator template they are routed from 1/2 in board, painted and stud mounted with a pattern. Thicker stock means more sheet area and more router time per letter, and your material library carries the price.
Yes. The template prices the face material from your library, so you set your own aluminum or acrylic price and the quote follows. Metal usually changes the router, paint and finishing hours too, and you can edit those lines in the quote editor before sending.
Quote your next set of letters with the lift and the drive priced in
Enter the count, height and install height, and see the real margin before the customer does.