Skip to content
SignEstimator

· 5 min read

Wayfinding signage cost by sign count, ADA share and drive

A package of 20 interior wayfinding signs, 70 percent of them ADA tactile and half a square foot each, costs a sign shop $1,287.26 to make and install in our worked example and sells for $2,150 at a 40 percent margin, or $107.50 a sign. Ten signs of the same kind sell for $1,570, or $157 a sign. One hundred and fifty sell for $11,000, or $73.33 a sign.

Public cost guides quote a range per sign and stop there. A shop that has to answer a facility manager's room schedule needs the lines behind the range, because the sign count, the ADA share, the size and the drive each move the price by a different amount. This article prices one package four ways so you can see which input matters.

Wayfinding signs installed in an office lobby
01 Demo
01 Demo

Estimate this job

Describe a sign job or upload the customer's photo. You get line items, a sale price and the margin in about a minute.

Uploading...
miles

No account needed for your first estimate.

What we priced

Interior room identification and directional signs for an office or clinic: ADA tactile and braille blanks for permanent room signs, cast acrylic panels for directional signs, layout and proofs, laser and router cutting, assembly and one installer mounting them on walls. Every price below ran through the SignEstimator wayfinding template with the starter library rates: tactile blanks at $28 a square foot, cast acrylic at $265 a 4 by 8 sheet with 15 percent waste, installer at $32 an hour, travel at $3.25 a mile, 18 percent overhead and a 40 percent target margin. Margin here means profit divided by price, and markup vs margin for sign shops explains why that differs from markup.

Why the price per sign falls as the package grows

Signs Cost with overhead Price at 40 percent margin Price per sign
10 $941.72 $1,570 $157.00
20 $1,287.26 $2,150 $107.50
40 $2,093.38 $3,490 $87.25
80 $3,590.56 $5,985 $74.81
150 $6,599.00 $11,000 $73.33

Between 10 and 20 signs the price per sign falls by a third. Between 80 and 150 it barely moves. The reason is the fixed part of the job: two hours of layout, a first hour on site, the minimum drive and the acrylic sheet. Once those are spread over 80 signs, what is left is material and hours that grow with each sign.

A customer who gets three quotes for a 12 sign suite and sees one at $90 a sign and one at $170 is not looking at two opinions of the same job. One shop priced the fixed part and the other did not.

What the tactile and braille blank adds

Permanent room signs need tactile characters and braille. Directional signs and many overhead signs do not. The mix changes the price more than most owners expect.

ADA share of 20 signs Cost with overhead Price Change
20 percent $1,113.80 $1,860 baseline
70 percent $1,287.26 $2,150 +$290
100 percent $1,391.34 $2,320 +$460

The blank is $28 a square foot, while a $265 sheet of cast acrylic is about $8.28 a square foot. The accessibility rules for the signs themselves are in section 703 of the 2010 ADA Standards for Accessible Design, which also covers mounting location. Check the rules and the local code for each project, because the template prices material and labor and does not decide what a given sign must have.

Sign size and distance from the shop

Doubling the size of each sign from half a square foot to one square foot takes the 20 sign package from $2,150 to $2,580. That is 20 percent more money for twice the area, because the layout, assembly and install hours do not double.

Distance from shop, one way Cost with overhead Price
5 miles $1,260.71 $2,105
15 miles $1,287.26 $2,150
30 miles $1,402.31 $2,340
60 miles $1,632.41 $2,725

A short drive hits the minimum charge of $75, so a 5 mile job costs almost the same as a 15 mile one. Past 30 miles the trip becomes a real line. If the schedule needs a second visit for corrections, add the trip again.

The 20 sign package

Line Quantity Cost
ADA tactile and braille blanks 7 sq ft $205.80
Acrylic directional panels 1 sheet with waste $304.75
Paint and second surface vinyl 10 sq ft $12.65
Laser and router cutting 2.1 hr $46.20
Message schedule, layout and proofs 4 hr $120.00
Assembly and quality check 4 hr $112.00
Install, 1 person 6 hr $192.00
Truck and crew travel 30 miles $97.50
Direct cost $1,090.90
Overhead at 18 percent $196.36
Cost with overhead $1,287.26
Price at 40 percent margin $2,150.00

Materials are $523.20, or 48 percent of direct cost. Layout, assembly and install are $424, or 39 percent. A customer who compares quotes by looking at what a blank costs online is comparing half the bill.

How to quote a wayfinding package from a room schedule

  1. Ask for the room schedule and the plan before you give a number. The count and the ADA share come straight from it.
  2. Split the schedule into tactile room signs and directional signs. Price each group by area.
  3. Put layout and proofs on the quote as their own line, so a customer who removes ten signs does not remove your design time.
  4. Price install and travel as separate lines, not as a percent of the signs.
  5. Add overhead and your target margin last.

When a property manager wants a signed approval of the final message schedule before you cut anything, an e-signing service such as Signsend is a quick way to get it back from several people.

Price every package from the same rules

In a spreadsheet each table above is a separate tab, and the ADA share is the number people forget to change. In SignEstimator the estimator enters the count, the size, the ADA share and the distance once and sees the price with the margin in view. Wayfinding sign estimating software shows the same template against a flat rate per sign, with a small package sold at a 5.8 percent margin. For the install side, how to quote sign installation covers crew hours and equipment on bigger jobs, and the flat monthly plans are on the pricing page.

02 Questions
02 Questions

Frequently asked questions

[email protected]