Wayfinding sign estimating software that prices every ADA sign, proof hour and install trip
Wayfinding sign estimating software prices a signage package from what it really uses: ADA tactile and braille blanks by area, acrylic directional panels by the sheet, laser and router time, layout and proofs, assembly, one installer on site and the drive. SignEstimator does it from your own rates and shows cost and margin before the quote goes out. In our worked example 20 interior signs, 70 percent of them ADA tactile, cost $1,287.26 with overhead and sell for $2,150 at a 40 percent margin.
The sign count is the wrong number to price from. On that package the materials are $523.20, but layout, assembly and install add up to $424 and the drive adds $97.50. A flat price per sign cannot see that, and it is wrong in both directions.
Estimate this job
- Materials
- Machine time
- Install
- Pricing
Why a flat price per sign breaks on interior packages
Room identification, directional and directory signs are sold by the sign, so shops quote by the sign. It is easy to say and it hides three things.
- Layout and proofs start with a block of hours before the first sign. In the template that is 2 hours plus 6 minutes per sign, so a small package carries the whole block on a few signs.
- The installer arrives with a drill, a level and a template, and a two room job still costs the trip. Install time grows with the count, but travel and setup do not.
- The ADA share changes the material bill. Tactile and braille blanks are priced by area at a far higher rate than cut acrylic, so a package that is 100 percent ADA costs more than one that is 20 percent ADA with the same number of signs.
The same blind spot shows up in how to quote sign installation, and in the dimensional letter estimating example, where a small set sold at a flat rate lost money.
Five signage packages priced from parts against a flat $100 per sign
These are example figures from the SignEstimator starter library, run through the wayfinding template: ADA tactile and braille blanks at $28 a square foot, cast acrylic at $265 a 4 by 8 sheet with 15 percent waste, cast vinyl at $1.10 a square foot, laser time at $22 an hour, design at $30, fabrication at $28, one installer at $32 an hour, travel at $3.25 a mile for a 15 mile drive each way, 18 percent overhead and a 40 percent target margin. Every sign is half a square foot and 70 percent are ADA tactile.
| Package | Cost with overhead | Price at 40 percent margin | Price per sign | Flat $100 per sign price | Result at the flat rate |
|---|---|---|---|---|---|
| 10 signs | $941.72 | $1,570 | $157.00 | $1,000 | 5.8 percent margin |
| 20 signs | $1,287.26 | $2,150 | $107.50 | $2,000 | 35.6 percent margin |
| 40 signs | $2,093.38 | $3,490 | $87.25 | $4,000 | 47.7 percent margin |
| 80 signs | $3,590.56 | $5,985 | $74.81 | $8,000 | 55.1 percent margin, bid likely lost |
| 150 signs | $6,599.00 | $11,000 | $73.33 | $15,000 | 56.0 percent margin, bid likely lost |
The flat rate fails twice. The ten sign package is sold at a margin of 5.8 percent, after the shop planned for 40, and it looks like an easy yes. The 150 sign package is $4,000 above the estimated price, so a competitor with a real estimate wins it. Both errors come from the same rate.
What the 20 sign package is made of
| Line | Quantity | Cost |
|---|---|---|
| ADA tactile and braille blanks | 7 sq ft | $205.80 |
| Acrylic directional panels | 1 sheet with waste | $304.75 |
| Paint and second surface vinyl | 10 sq ft | $12.65 |
| Laser and router cutting | 2.1 hr | $46.20 |
| Message schedule, layout and proofs | 4 hr | $120.00 |
| Assembly and quality check | 4 hr | $112.00 |
| Install, 1 person | 6 hr | $192.00 |
| Truck and crew travel | 30 miles | $97.50 |
| Direct cost | $1,090.90 | |
| Overhead at 18 percent | $196.36 | |
| Cost with overhead | $1,287.26 | |
| Price at 40 percent margin | $2,150.00 |
The tactile blanks alone are $205.80, or 19 percent of direct cost, which is why the ADA share matters. Move the same 20 signs from 20 percent ADA to 100 percent ADA and the price goes from $1,860 to $2,320. Make each sign one square foot instead of half a square foot and it goes to $2,580. Margin on this page means profit divided by price, and markup vs margin for sign shops shows why a 40 percent markup is a different number.
From sign count and ADA share to a branded quote
- 1 Pick the wayfinding and ADA signs template and enter the number of signs, the size of one sign and the share that is ADA tactile.
- 2 The template turns count, size and share into tactile area and acrylic sheets, with your waste percent and your material prices.
- 3 Laser, layout, proof and assembly hours come from your own machine and labor rates and grow with the count.
- 4 Install adds crew hours for the count plus the drive, and sign installation estimating shows how those lines are built for larger jobs.
- 5 You see cost, price and real margin, edit any line in the quote editor and send a branded quote the customer accepts online.
If the property also wants a lobby directory in ACM, the same quote can carry a panel option priced by our ACM panel pricing software page.
Lines in the wayfinding template
| Part | How it is priced |
|---|---|
| ADA tactile and braille blanks | Per square foot of the ADA share, with your waste percent |
| Directional and room ID panels | Cast acrylic by the 4 x 8 sheet from the non ADA area |
| Paint and second surface vinyl | Per square foot across the package |
| Machine time | Laser and router hours that grow with the sign count |
| Layout and proofs | A block of design hours plus a per sign allowance |
| Assembly | Fabrication hours per sign |
| Install | One installer, hours by sign count, no lift |
| Travel | Mileage both ways with a minimum charge on short drives |
The template prices the material and the labor. Whether a given sign meets accessibility rules for character height, contrast and braille is for the shop and its customer to check against the 2010 ADA Standards for Accessible Design and the local code. Change your blank price once in the library and every open quote uses it. The sign estimating software pricing page lists what each plan includes.
Shops that win signage packages for offices, clinics and schools
Interior packages come from architects, general contractors and facility managers, usually as a schedule of rooms with a deadline and a competing bid. The estimator who answers first with a clean number gets the call back.
SignEstimator fits the shop that quotes wayfinding between larger outdoor jobs. Type the count and the ADA share, check the drive and send the quote in a few minutes. The signage quote calculator shows the same approach for a single exterior sign, and the wayfinding signage cost article walks the same package through four tenant sizes.
Which plan fits a shop that sells wayfinding packages
Every plan has a flat price with seats included and no per user fee. Yearly billing takes 50 percent off.
| Plan | Billed yearly | Billed monthly | Fits |
|---|---|---|---|
| Solo | $24 per month | $49 per month | One estimator quoting interior packages, letters and panels |
| Shop | $74 per month | $149 per month | Up to 5 seats, CRM and QuickBooks Online or Xero export |
| Team | $199 per month | $399 per month | Work orders and job costing against actual install hours |
| Multi-location | $449 per month | $899 per month | Unlimited seats across locations |
There is no free plan. Run one signage package through the demo on this page without an account first.
Frequently asked questions
[email protected]In our worked example 20 interior signs, 70 percent of them ADA tactile, sell for $2,150 at a 40 percent margin, or $107.50 a sign. Ten signs sell for $1,570, or $157 a sign, and 150 signs sell for $11,000, or $73.33 a sign. The fixed hours and the trip are spread over more signs.
Price the tactile and braille blank by area with waste, add the cut or printed face, laser and router time, layout and proofs, assembly and install, then apply overhead and your target margin. The ADA share of a package changes the blank cost, so price it as an input and not as a flat rate.
In the 20 sign example install is one installer for six hours at $32, which is $192, plus $97.50 for a 30 mile round trip. Install time grows with the count at a quarter hour per sign after a first hour, and a longer drive adds its own line.
Yes, per square foot. In the starter library a tactile and braille blank is $28 a square foot, while a $265 sheet of cast acrylic is about $8.28 a square foot. Twenty signs that are 100 percent ADA sell for $2,320 against $1,860 at 20 percent ADA.
Yes. Set the ADA share to the tactile signs in the schedule and the rest are priced as acrylic directional panels. If a part of the job needs a different material, add or edit a line in the quote editor before you send it.
Quote your next signage package with the proofs and the drive priced in
Enter the count, the ADA share and the distance, and see the real margin before the customer does.